Faced with the surging demand for large-scale mass production in the new energy industry, Foshan Shuochen has developed 7m³ lithium battery anode material coating and granulation equipment, which is suitable for most lithium battery production lines in the Chinese market.

Customer Core Requirements

1. Capacity requirement: Daily output of a single set of equipment is 4.8 tons

2. Raw materials: Asphalt and graphite

3. Particle size requirement: 13–21μm

4. Temperature requirement: Maximum operating temperature of the granulation equipment reaches 650℃; the cooling equipment must reduce the temperature from 650℃ to below 60℃ within 4 hours

Solution

To meet the customer's high daily capacity demand, we equipped the customer with a 7m³ lithium battery anode material coating and granulation production line.

This equipment is suitable for granulation production using graphite and asphalt as raw materials.

The equipment is also equipped with an intelligent PLC control system and a pipeline conveying system.

Delivery Process

1. In the early stage of communication with the customer, we fully understood the process flow of the customer's production line, workshop layout of the equipment, orderly arrangement of pipelines and other design points, and provided relevant design schemes. The design period is generally 1 week.

2. After the scheme is confirmed, we provide equipment and production line layout drawings to the customer. The drawing revision and verification period is 3 days.

3. Arrange production schedule to ensure the completion of equipment manufacturing and delivery on the scheduled date. The production period is 30 days, and the installation and commissioning period is 1 week.

4. Provide safe and correct equipment operation training for production line personnel, with technical engineers on-site for 5 days.

5. After one week of trial operation of the production line, a one-year warranty service is provided.

Project Achievements

1. The capacity of the 7m³ lithium battery anode material coating and granulation production line has increased by 20% compared with the previous production line.

2. The uniform particle size is about 18μm with a concentrated particle size distribution.

3. The operating temperature of the granulation equipment and the cooling rate of the cooling equipment meet the customer's expectations.

4. The finished product qualification rate has increased from 70% to 89%.